Ubuntu 14.04 LTS can't get it to Boot up on Raspberry Pi3

  • 1
  • Problem
  • Updated 3 years ago
  • Not a Problem
Ubuntu 14.04 LTS can't get it to Boot up on Raspberry Pi3
Any one know how to fix this?


I installed this and it load up on the Raspberry pi3 but the Riseplayer does not load and says not supported only supports Ubuntu 14.04 LTS.

ubuntu-mate-15.10.3-desktop-armhf-raspberry-pi-2.img

I installed this but the rasberry pi3 did not boot up am i missing a raspberry pi3 kernal or bootup files.
2015-04-06-ubuntu-trusty.img

I hope someone has a ubuntu version that works with the Raspberry pi3 and can load the riseplayer software.

Does riseplayer really work on raspberry pi3?

Is there something special i need to do to get rise player to run on another version of ubuntu?
Any help would be appreciated.

Thank you,
JB
Photo of JB

JB

  • 532 Points 500 badge 2x thumb
  • frustrated

Posted 3 years ago

  • 1
Photo of HSuarez

HSuarez

  • 11,896 Points 10k badge 2x thumb
Hi JB,
When you try to run the installer .sh you will see that message since we really only support Ubuntu 14.04 LTS.
Looking at this thread from Raspberry Pi it looks like Ubuntu 14.04 LTS has not been updated with latest kernel/firmware in regards to Raspberry Pi 3.  They are showing a couple of suggestions - but again note that the installer has been tested on Ubuntu 14.04 LTS.
(Edited)
Photo of JB

JB

  • 532 Points 500 badge 2x thumb
Windows 10 IoT Core Does not work with Raspberry Pi3 yet either. I guess I will switch to the Rasberry Pi2 or buy one of rise visions preconfigured players.
Photo of HSuarez

HSuarez

  • 11,896 Points 10k badge 2x thumb
You can also check out the hardware recommendations thread for further suggestions/ideas.
(Edited)
Photo of William Oneal

William Oneal, Champion

  • 13,770 Points 10k badge 2x thumb
The pi3 has IOT core. You need to use the developer preview version to get it to work.
Photo of HSuarez

HSuarez

  • 11,896 Points 10k badge 2x thumb
I've also found that you need to make sure that the micro SD card is formatted the correct way. It looks like Raspberry Pi 3 is recognized by Windows IoT https://developer.microsoft.com/en-us...